5V 60A Power Supply for LED Strips and CCTV
Add to wishlist
Category: alitove 5v

About this item
- 𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧: Widely used to drive WS2812B WS2811 2835 5050 5V LED strip pixel light, Wifi IP Home Camera, DVR NVR CCTV Security Camera System, Recorder, VoIP Phone Router, Home Phone System, Monitor, two-way radio, DC motor and other 5V devices no more than 300W.(Indoor use only!) 𝐍𝐎𝐓𝐄: NOT for Electrolysis tank
- 1. The cat chased the mouse.
- 2. The dog barked at the mailman.
- 3. The sun rose in the morning.
- 4. The baby laughed and played.
- 5. The rain fell softly on the roof.
- 𝐌𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐒𝐚𝐟𝐞𝐭𝐲 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧𝐬: All the power supplies are put through rigorous quality control procedures to ensure safe, reliable operation for years to come. Built in multiple safety protections, such as overload cut-off, over voltage cut-off, over temperature cut-off, short-circuit cut-off.
- 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐭 𝐒𝐦𝐚𝐫𝐭 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: The aluminum shell is designed with multiple heat dissipation holes and a built-in temperature-controlled cooling fan. The cooling fan only operates when the internal temperature reaches 113°F (45°C), allowing for more efficient heat dissipation.
- 𝐏𝐫𝐚𝐜𝐭𝐢𝐜𝐚𝐥 𝐚𝐧𝐝 𝐂𝐨𝐧𝐯𝐞𝐧𝐢𝐞𝐧𝐭 𝐀𝐜𝐜𝐞𝐬𝐬𝐨𝐫𝐢𝐞𝐬: 5V AC/DC Adapter with aligator clips, heavy-duty copper power cord, wire lugs, metal clip and screw. Dial to the correct gear position, cut off the power before disassembling the connection. (Note: 110V for USA/CA and 220V for EUR.)
- 𝐍𝐞𝐰 𝐕𝐞𝐫𝐬𝐢𝐨𝐧 𝐂𝐨𝐧𝐯𝐞𝐫𝐭𝐞𝐫: With red button on/off switch function, more safe and convenient power operation. Input voltage: AC 110V / 220V (85-140V / 185-265V); Output current depends on the device, e.g.DC 5V 8A 40W, 10A 50W, 30A 150W, and the peak current is 60A, peak power 300W.
- 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬 𝐁𝐞𝐟𝐨𝐫𝐞 𝐔𝐬𝐞: We suggest the max use of power should be no more than 80% of the full loads, otherwise,the power supply's spanlife will be shortened. We recommend you to use this 5V 60A 300W power supply to power devices less than 240W. For resistive device, SMPS peak power ≥ device power × 1.25 times. For Motor device, the peak power of the SMPS needs to be more than 2 times the power of the Motor.























