BTF-LIGHTING 14-Key Wireless RF RGB LED Controller for WS2811/WS2812B Pixel Strips (DC5/12V) - 300 Color Effects, Ideal for DIY Projects

About this item

• Can not control SK6812 RGBW led strip .Because it is 4 channels. It can control 1024pixels , but we recommend that adding voltage for LED strip.
• Suit for all WS2812B products,ex WS2812B strip, WS2811 string, 1903 IC ,6803IC . Support all the 3 PIN Single signal IC chip LED product.The remote can match only one receiver. One remote also can control many receivers .
• The controller for WS2811 and WS2812B LED strips is straightforward and user-friendly. It allows for easy adjustment of color order (RGB, GRB, BRG, etc). When the Green button is pressed, the LED strip will display red. It is important to use a DC5V power supply with WS2812B LED strips, as input voltage must match output voltage. Please refer to the user manual for proper setup instructions.
• 300+ kinds of Chasing or static lighting effects. DC3V CR2025 button battery. RF remote .If it is very hot during use, it is necessary to add voltage to the LED Strip.
• Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used. Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED
• Mini Convenience Easy to operate. Can adjust the pixels number ,adjust the speed ,adjust the brightness，Mark the effect you like.
• Color calibration. When the remote color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the remote to calibrate the colors to make them consistent.