BTF-LIGHTING SP901E LED Pixel Signal Amplifier for WS2812B, WS2811, WS2813, SK6812, WS2815, WS2801, SK9822 and Addressable RGB LED Strips and Panels

About this item

• Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller.
• DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.
• You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 / FCOB RGB WS2811 IC ,DC12V WS2815, DC12V 1903, DC12V 6803 Or DC24V FCOB RGB WS2811 IC at the same time via this singal amplifier since they have the same singal.
• Please note that this device is not a controller; it operates in conjunction with one. It does not support 4-pin or 5-pin RGB/RGBW LED strips without an IC chip, specifically the 5050 type. This SPI signal amplifier works with various types of 5V-TTL signal dual signals. It accepts a single input signal and can simultaneously output signals across 4 or 8 channels. Each channel is capable of controlling the same number of LED pixels as the main controller.
• It can output 8 channels for addressable LED strip with single data wire, such as FCOB RGB WS2811 IC , WS2812B, WS2811, SK6812RGB, SK6812-RGBW,SM16703, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as WS2813, WS2815